EasyManuals Logo

Motorola G24 Guide User Manual

Motorola G24 Guide
642 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #191 background imageLoading...
Page #191 background image
Chapter 3: AT Commands Reference
December 31, 2007 AT Commands Reference Manual 3-107
+CNMI, New Message Indications to Terminal
This command handles enabling of unsolicited notifications to the terminal when an SM is
received by the G24.
After sending an unsolicited response to the TE, the G24 will expect a +CNMA (new message
acknowledgement) from the TE within a predefined timeout of 60 seconds. The G24 will not send
another unsolicited response to the TE before the previous one is acknowledged. If acknowledged
within the timeout, the new SM is not saved in the message storage. If not, the new SM is saved
in the message storage and +CNMI parameters are set to 0.
The following table shows the +CNMI parameters.
Example
AT+CNMI=?
+CNMI: (0,3),(0-2),(0,2),(0-2),(0)
OK
Command Type Syntax Response/Action
Set
+CNMI=[<mode>
[,<mt>[,<bm>
[,<ds>[,<bfr>]]]]]
OK
or:
+CMS ERROR: <err>
Read
+CNMI? +CNMI:<mode>,<mt>,<bm>,<ds>,<bfr>
Test
+CNMI=? +CNMI: (list of supported <mode>s), (list of supported <mt>s),
(list of supported <bm>s), (list of supported <ds>s), (list of
supported <bfr>s)
Table 3-59: +CNMI Parameters
<Parameter> Description
<mode> 0 Buffer unsolicited result codes (default).
3 Forward unsolicited result codes directly to the terminal
<mt> 0 No SMS-DELIVER indications are routed to the terminal (default)
1 If SMS-DELIVER is stored in the G24, the memory location indication is
routed to the terminal using the unsolicited result code: +CMTI:
<mem>,<index>
2 SMS-DELIVER is routed directly to the terminal
<bm> 0 No CBM indications are routed to the terminal (default)
2 New CBMs are routed directly to the terminal
The CBM of multipage "CB" and "QuickView" are not supported.
<ds> 0 No SMS-STATUS-REPORT indications are routed to the terminal (default)
1 SMS-STATUS-REPORT is routed directly to the terminal
2 If SMS-STATUS-REPORT is stored in the G24, the memory location
indication is routed to the terminal using the unsolicited result code: +CDSI:
<mem>,<index>
<bfr> 0 No SMS-STATUS reports are buffered.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Motorola G24 Guide and is the answer not in the manual?

Motorola G24 Guide Specifications

General IconGeneral
BrandMotorola
ModelG24 Guide
CategoryTelephone Accessories
LanguageEnglish

Related product manuals