Motorola G24 Guide - MDBGD, Defines General Setting for Date Book

Phone and Date Books and Clock
3-88 AT Commands Reference Manual December 31, 2007
OK
AT+MALMH
+CME ERROR: operation not allowed
+MDBGD, Defines General Setting for Date Book
This command defines the general setting. It influences on the behavior of all the reminders. The
changes of <Auto-delete> are not applied until the next time the phone is power cycled.
This command is a non-basic command, which means that the G24 module rejects the command
with an appropriate error message when the SIM is not present and/or the phone is in lock state.
Command Type Syntax Response/Action Remarks
Set
+MDBGD=[<Aut
o-delete>
[,<Rate>
[,<Report>]]]
OK
or:
+CME ERROR:
<error_code>
The command execution result
returns configuration setting.
Read
+MDBGD? +MDBGD:
<Auto-delete>,<Rate>,
<Report>
OK
or:
+CME ERROR:
<error_code>
The command execution result
returns current configuration.
Test
+MDBGD=? +MDBGD:(list of
supported
<Auto-delete>s),(list of
supported
<Rate>s),(list of
supported <Report>s)
The command execution result
returns possible values' range.