Motorola G24 Guide - CPMS, Preferred Message Storage

Chapter 3: AT Commands Reference
December 31, 2007 AT Commands Reference Manual 3-99
Example
AT+CSMS=128
+CSMS: 001,001,001
OK
AT+CSMS?
+CSMS: 128,001,001,001
OK
AT+CSMS=?
+CSMS: (128)
OK
+CPMS, Preferred Message Storage
This command handles the selection of the preferred message storage area. The message storage
area is divided into three parts, mem1, mem2 and mem3.
Command
Type
Syntax Response/Action Remarks
Set
+CPMS=<mem1>
[,<mem2>[,<mem
3>]]
+CPMS:
<used1>,<total1>,<used2>,
<total2>,<used3>,<total3>
OK
or:
+CMS ERROR: <err>
The Set command sets the memory
storage.
Read
+CPMS? +CPMS:
<mem1>,<used1>,<total1>,
<mem2>,<used2>,<total2>,
<mem3>,<used3>,<total3>
OK
or:
+CMS ERROR: <err>
The Read command displays the selected
memory storage type for the three
memory areas.
Test
+CPMS=? +CPMS: (list of supported
<mem1>s),(list of
supported <mem2>s),(list
of supported <mem3>s)
OK
+CMS ERROR: <err>
The Test command lists the supported
memory storage for <mem1>, <mem2>
and <mem3>.