Motorola G24 Guide - Firmware Update over the Air (FOTA); FOTA Command for Non-Automatic Mode (Non-Transparent Mode)

Firmware Update Over the Air (FOTA)
4-34 AT Commands Reference Manual December 31, 2007
Firmware Update Over the Air (FOTA)
FOTA Command for Non-Automatic Mode
(Non-Transparent Mode)
// First, set the Web-Session default entry
AT+MFOTAWSCFG=5,8080,"wap.orange.co.il","Orange","mobile54","192.118.11.55"
OK
AT+MFOTAWSCFG? // Read the Web-Session default entry parameters
+MFOTAWSCFG: 5 , 8080,"wap.orange.co.il","Orange","192.118.11.55"
OK
// Second, set the DM session as Non-Automatic
// We would like to control all the FOTA steps, that the reason that we se the Non-Automatic mode.
AT+MFOTACNFG?
+MFOTACNFG: 0
// Enable FOTA indications
AT+MFOTAIND=1
+MFOTAREQ: 1 // Request to begin DM session (Bootstrap)
AT+MFOTARSP=0 OK // Confirm DM session
+MFOTAIND: 10, 5
+MFOTAIND: 10, 10
+MFOTAREQ: 2 // Update package request
AT+MFOTARSP=0 // Confirm the update process
OK
+MFOTAIND: 10, 4 // Open applications indication
+MFOTAIND: 10, 5 // DM Session in progress
+MFOTAIND: 10, 7 // DM Session complete
+MFOTAIND: 16, 14 // Fetch descriptor file indication
+MFOTAIND: 16, 13, 0 // Descriptor progress bar indicate 0%
+MFOTAIND: 16, 13, 5 // Descriptor progress bar indicate 5%
+MFOTAIND: 15, 13, 5 // Update-package progress bar indicate 5%
+MFOTAIND: 15, 13, 44 // Update-package progress bar indicate 44%
+MFOTAIND: 15, 13, 83 // Update-package progress bar indicate 83%
+MFOTAIND: 15, 13, 100 // Update-package progress bar indicate 100%