Email
3-160 AT Commands Reference Manual December 31, 2007
<status> Status of the message (can be a combination of statuses).
Example:
0 = READ
1 = SENT
2 = UN-READ
3 = UN-SENT
<from> Original message address.
<to> Addresses of intended recipients of current email message. The maximum length of
this parameter is 500 characters.
<cc> Addresses of intended copy recipients of current email message. The maximum
length of this parameter is 500 characters.
<bcc> Addresses of intended copy recipients of current email message. The maximum
length of this parameter is 250 characters.
<subject> The subject of the current email messages. The maximum length of this parameter is
128 characters.
<date> Information about date and time of message receiving by email server. The date
format is: "MM/DD/YY HH:MM: +-Z". Where MM - 2-digit month, YY - 2-digit
year, DD - 2-digit day of month, HH - 2-digit hour, MM - 2-digit minute, Z -
(optional) time zone offset from Greenwich Mean Time. When email is in Draft or
Outbox then it is no GMT time is printing.
<priority> Specifying the email message priority.
Table 3-96: +MEML Parameters (Cont.)
<Parameter> Description
<status>
(decimal)
Description
0READ
1SENT
2 UN-(read/sent)
4 Reserved
8 Reserved
16 Reserved
32 Reserved
64 Reserved
128 Reserved
<priority>
value
Description
0Urgent
1 Normal
To Next Page
Loading...
Need help?
General
