Phone and Date Books and Clock
3-92 AT Commands Reference Manual December 31, 2007
This command is a non-basic command, which means that the G24 module rejects the command
with an appropriate error message when the SIM is not present and/or the phone is in lock state.
The following table shows the +MDBW parameters.
Command Type Syntax Response/Action Remarks
Set
+MDBW=[<Inde
x>][,"<Time>"
[,"<Date>"
[,"<Title>"
[,<Duration>
[,<Repeat>]]]]]
OK
or:
+CME ERROR:
<error_code>
Test
+MDBW=? +MDBW: (list of
supported
<Index>s),(list of
supported
<Time>s),(list of
supported
<Date>s),(<tLength>),(
list of supported
<Duration>s),(list of
supported <Repeat>s)
OK
or:
+CME ERROR:
<error_code>
This command queries the allowable
command field and size.
Table 3-48: +MDBW Parameters
<Parameter> Description
Index Index for a given date book entry.
Title Title identifier for a date book entry, according to the
character set as specified by command +CSCS.
Max length is 64 characters.
Time Time format: HH:MM, according to the character set as
specified by command +CCLK.
Date Date format: YY/MM/DD, according to the character
set as specified by command +CCLK.
Duration A time length of the reminder in minutes' values.
Number in 0-997920 range.
Default value: 0.
To Next Page
Loading...
