Chapter 3: AT Commands Reference
December 31, 2007 AT Commands Reference Manual 3-103
The following table shows the +CSCA parameters.
Example
AT+CSCA="4252833433"
OK
AT+CSCA?
+CSCA: "4252833433",129
OK
Command
Type
Syntax Response/Action Remarks
Set
+CSCA=<sca>[,<tosca>] OK
or:
+CMS ERROR: <err>
The Set command sets the service
center address.
Read
+CSCA? +CSCA: <sca>,<tosca>
Test The Test command for +CSCA is not
defined by ETSI, and therefore is not
supported by the G24. The G24 returns
an error.
Table 3-55: +CSCA Parameters
<Parameter> Description
<sca> Service Center Address
<tosca> Type of Service Center Address is the current address format setting
To Next Page
Loading...
Need help?
General
