Motorola G24 Guide User Manual

SMS
3-140 AT Commands Reference Manual December 31, 2007
The following table shows the +MEDT parameters.
Note: All AT+MEDT settings will be saved in FLEX and after power up will behave according
to the last setting.
Example
AT+MEDT?
+MEDT: 1
OK
AT+MEDT=?
+MEDT: (0-15)
Table 3-84: +MEDT Parameters
<Parameter> Description
<mode> MEDT mode:
Default value:
On Power Up - as previously saved in FLEX bytes.
Before using the set command for the first time, the default value is dependent on the
flex in use.
<mode>
On/Off
Tone
Goodbye
Tone
Welcome
Tone
Device
Tones
0 Disable Disable Disable Disable
1 Disable Disable Disable Enable
2DisableDisableEnable Disable
3DisableDisableEnable
Enable
4DisableEnable Disable Disable
5DisableEnable
Disable Enable
6DisableEnable Enable Disable
7DisableEnable
Enable Enable
8 Enable Disable Disable Disable
9 Enable
Disable Disable Enable
10 Enable Disable Enable Disable
11 Enable
Disable Enable Enable
12 Enable Enable Disable Disable
13 Enable
Enable Disable Enable
14 Enable Enable Enable Disable
15 Enable
Enable Enable Enable

Motorola G24 Guide Specifications

General

Brand	Motorola
Model	G24 Guide
Category	Telephone Accessories
Language	English