SMS
3-146 AT Commands Reference Manual December 31, 2007
Table 3-89 shows the conversion between the <dcs> and +CSCS setting when reading SM.
Examples:
### Store in TEXT mode SMS encoded in default alphabet with UDHI set.
### Character set is ASCII.
AT+CMGF=1
OK
AT+CSMP=81,167,0,0
OK
AT+CMGW="0544565803"
> 050003090301123456786543
+CMGW: 222
OK
AT+CMGR=222
+CMGR: "STO UNSENT","0544565803",
050003090301123456786543
OK
AT+CMGF=0
OK
AT+CMGR=222
+CMGR: 2,,25
07917952140230F251000A8150446585300000A70D050003090301123456786543
OK
### Store in TEXT mode SMS encoded in UCS2 alphabet with UDHI set.
### Character set is ASCII.
AT+CSMP=81,167,0,10
OK
AT+CMGF=1
OK
AT+CMGW="0544565803"
> 050003090301123456786543FE
+CMGW: 223
Table 3-89: <dcs> field and +CSCS settings conversion when reading SM
CASE <dcs> field User-Data-Header
Current TE
character set
Action
A Default alphabet Not Set All G24 converts GSM alphabet
into current TE character set
according to rules of
GSM07.05, Annex A
B Default alphabet Set All G24 converts each 8-bit from
TP-UD, encoded in GSM
alphabet into two IRA
character long hexadecimal
number
C 8-bit or UCS2 All All G24 converts each 8-bit octet
into two IRA character long
hexadecimal number
To Next Page
Loading...
