Hardware Information
3-222 AT Commands Reference Manual December 31, 2007
<Average_calc
_duration>
1-255 For how long the average calculation will be active.
0 - Not active.
255 - Endless.
1...254 - minutes.
1- Default value if
average is active.
While not active = 0.
<Report_interv
al>
0-255 Time interval between two average reports
(seconds).
0 - Default value.
<Average> Average calculation result.
Table 3-143: +MMAD Parameters (Cont.)
<Parameter> Description Range/Remark
To Next Page
Loading...
