Audio
3-248 AT Commands Reference Manual December 31, 2007
The following table shows the +CRTT parameters.
Read
AT+CRTT? +CRTT:
<RingTypeNumber>
OK
or:
+CME ERROR: <err>
The Read command returns the ring
type number.
Test
AT+CRTT=? +CRTT: (list of
supported
<RingTypeNumber>s),
(list of supported
<operation>s)
OK
or:
+CME ERROR: <err>
The Test command returns the list of
supported tone type numbers and
operations.
Table 3-164: +CRTT Parameters
<Parameter> Description
<RingType
Number>
Ring tone styles (see Table 3-165)
<operation> Play or set a tone
0 Play (play one cycle)
1Set
2 Stop
Command
Type Syntax Response/Action Remarks
To Next Page
Loading...
