Chapter 3: AT Commands Reference
December 31, 2007 AT Commands Reference Manual 3-313
The following table shows the +MKPD parameters.
Example
AT+CMER=0,2,0,0,0
AT+MKPD=m,1//Emulate pressing the MENU button
OK
+CKEV: "M",1 //If +CMER is configured to echo and phone not locked
AT+MKPD=m,0//Emulate releasing the MENU button
OK
+CKEV: "M",0
Table 3-205: +MKPD Parameters
<Parameter> Description
<state> Key press state
0 Release
1Press
<key> Virtual keycodes, described in Table 3-204.
To Next Page
Loading...
