Chapter 3: AT Commands Reference
December 31, 2007 AT Commands Reference Manual 3-341
Read
+CGEQREQ? +CGEQREQ: <cid>, <Traffic
class> ,<Maximum bitrate UL>
,<Maximum bitrate DL>
,<Guaranteed bitrate UL>
,<Guaranteed bitrate DL>
,<Delivery order> ,<Maximum
SDU size> ,<SDU error ratio>
,<Residual bit error ratio>
,<Delivery of erroneous SDUs>
,<Transfer delay> ,<Traffic
handling priority>
[<CR><LF>+CGEQREQ: <cid>,
<Traffic class> ,<Maximum bitrate
UL> ,<Maximum bitrate DL>
,<Guaranteed bitrate UL>
,<Guaranteed bitrate DL>
,<Delivery order> ,<Maximum
SDU size> ,<SDU error ratio>
,<Residual bit error ratio>
,<Delivery of erroneous SDUs>
,<Transfer delay> ,<Traffic
handling priority>
[…]]
The read command
returns the current settings
for each defined context.
Command
Type Syntax Response/Action Remarks
To Next Page
Loading...
