Motorola G24 Guide - Page 429

Chapter 3: AT Commands Reference
December 31, 2007 AT Commands Reference Manual 3-345
Example
Set commands:
AT+CGEQREQ=1,1,64,64,64,64,1,0,"1E4","1E4",1,0,3
OK
AT+CGEQREQ=2,2,32,32,16,16,2,1000,"1E4",,0,0,2
OK
AT+CGEQREQ=3,3,0,0,0,0,0,1500,"1E4",,0,1000,1
OK
Read commands
:
AT+CGEQREQ?
+CGEQREQ: 1,1,64,64,64,64,1,0,"1E4","1E4",1,0,3
+CGEQREQ: 2,2,32,32,0,0,2,1000,"1E4","0E0",0,0,2
+CGEQREQ: 3,3,0,0,0,0,0,1500,"1E4","0E0",0,0,1
OK
Test commands
:
AT+CGEQREQ=?
+CGEQREQ: IP,(0-4),(0-384),(0-384),(0-64),(0-384),(0-2),(0-1500),(0E0|1E2|1E3|1E
4|1E5|1E6),(0E0|5E2|1E2|4E3|1E3|1E4|1E5|1E6|6E8),(0-3),(0-4100),(0-3)
+CGEQREQ: PPP,(0-4),(0-384),(0-384),(0-64),(0-384),(0-2),(0-1502),(0E0|1E2|1E3|1
E4|1E5|1E6),(0E0|5E2|1E2|4E3|1E3|1E4|1E5|1E6|6E8),(0-3),(0-4100),(0-3)
OK