Motorola G24 Guide - Page 431

Chapter 3: AT Commands Reference
December 31, 2007 AT Commands Reference Manual 3-347
Read
+CGEQMIN? +CGEQMIN: <cid>, <Traffic class>
,<Maximum bitrate UL>,
<Maximum bitrate DL>
,<Guaranteed bitrate UL>
,<Guaranteed bitrate DL>,
<Delivery order> ,<Maximum SDU
size> ,<SDU error ratio> ,<Residual
bit error ratio> ,<Delivery of
erroneous SDUs> ,<Transfer delay>
,<Traffic handling priority>
[<CR><LF>+CGEQMIN: <cid>,
<Traffic class> ,<Maximum bitrate
UL> ,<Maximum bitrate DL>
,<Guaranteed bitrate UL>
,<Guaranteed bitrate DL>,
<Delivery order> ,<Maximum SDU
size> ,<SDU error ratio> ,<Residual
bit error ratio> ,<Delivery of
erroneous SDUs> ,<Transfer delay>
,<Traffic handling priority>
[…]]
The read command
returns the current
settings for each defined
context.
Command
Type Syntax Response/Action Remarks