Motorola G24 Guide User Manual

Chapter 3: AT Commands Reference
December 31, 2007 AT Commands Reference Manual 3-355
Example
AT+CGDCONT=1,"IP","INTERNETG"
OK
AT+CGACT=1,1
OK
AT+CGEQNEG=1
+CGEQNEG: 1,2,64,64,64,64,0,1500,"1E4","4E3",0,4100,3
OK
Note 1:In accordance with 3GGP TS 23.107 Ver.4.4.0 - clause 6.5, not all combinations of "set"
parameters may be applied for +CGEQREQ and +CGEQMIN commands. A table of
possible combinations is given below.
All "Ignored" values will be automatically replaced by 0.
More detailed information about allowed parameters may be found in 3GGP TS 23.107 Ver.4.4.0
- clause 6.5.
R99 QoS
Parameters
Traffic Class
Notes
Conversational Streaming Interactive Background
Max Bit Rate 384 (bps) 384 (bps) 384 (bps) (UL and DL)
Max Bit Rate Rate 384 (bps) 384 (bps) 384 (bps) (UL and DL)
Guaranteed Bit UL 64 (bps) 64 (bps) 64 (bps)
Guaranteed Bit DL 384 (bps) 384 (bps) 384 (bps)
Delivery Order 0,1,2 0,1,2 0,1,2
Max SDU Size for
IP-type
1500 (octets) 1500 (octets) Ignored Ignored
Max SDU Size for
PPP-type
1502 (octets) 1502 (octets) Ignored Ignored
SDU Error Ratio 1E2, 7E3, 1E3,
1E4, 1E5
1E1, 1E2, 7E3,
1E3, 1E4, 1E5
1E3, 1E4, 1E6 1E3, 1E4, 1E6
Residual BER 5E2, 1E2, 5E3,
1E3, 1E4, 1E5,
1E6
5E2, 1E2, 5E3,
1E3, 1E4, 1E5,
1E6
4E3, 1E5, 6E8 4E3, 1E5, 6E8
Delivery of errors 0,1,2,3 0,1,2,3 0,1,2,3 0,1,2,3
Traffic delay 100 max 250 max Ignored Ignored
Traffic handling
priority
Ignored Ignored 1,2,3 Ignored

Motorola G24 Guide Specifications

General

Brand	Motorola
Model	G24 Guide
Category	Telephone Accessories
Language	English