Motorola G24 Guide User Manual

Chapter 3: AT Commands Reference
December 31, 2007 AT Commands Reference Manual 3-369
The following table shows the+MTKP Field Descriptions.
Note: The Cmd Type numbers refer to the proactive command which was sent from the SIM
(This is the ProactiveCmdType field).
For "get inkey" and "get input", a one-minute timer is set, and any response for these
unsolicited commands after one minute is not accepted.
Table 3-250: +
MTKP Field Descriptions
Cmd Type Description Responses
1 Provides data about the "Display
text" pro-active command.
+MTKP: <ProactiveCmdType>,<Priority>,<Text>
2 Provides data about the "Get Inkey"
pro-active command.
+MTKP:
<ProactiveCmdType>,<ResponseType>,<HelpInfo
>[,<Text>]
3 Provides data about the "Get Input'
pro-active command.
+MTKP: <ProactiveCmdType>,<ResponseType>
,<SecurityMode>,<MinLen>,<MaxLen>,
<HelpInfo>[,<Text>]
5 Provides data about 'Play Tone'
pro-active command.
+MTKP: <ProactiveCmdType>,
<ToneType>[,<TimeUnit>,<TimeInterval>],[<Text
>]
9 Provides data about the 'Send SMS'
pro-active command.
+MTKP: <ProactiveCmdType>[,<Text>]
10 Provides data about the 'Send SS'
pro-active command.
+MTKP: <ProactiveCmdType>[,<Text>]
12 Provides data about the 'Setup call'
pro-active command.
+MTKP: <ProactiveCmdType>,
<Type>,<CalledNb>,<Redials>,<Text>
13 Provides data about the 'Refresh'
pro-active command.
+MTKP: <ProactiveCmdType>,<RefreshType>
20 Provides data indicating the timeout
(get inkey, get input and select
item).
+MTKP: <ProactiveCmdType>
22 Provides a text string to display
when the G24 is in idle text mode.
+MTKP=22,"<idle mode text string>"
24 Sends a DTMF string after a call
has been successfully established.
+MTKP: 24,<status>
26 Displays a browser for URLs inside
browser-enabled G24s.
+MTKP: <ProactiveCmdType>,
<URL>,<bearers>,<proxy_Id>[,<alpha_id>]

Motorola G24 Guide Specifications

General

Brand	Motorola
Model	G24 Guide
Category	Telephone Accessories
Language	English