MR TAPCON - Page 42

4 Product description
Maschinenfabrik Reinhausen GmbH 202042 3587317/21 ENTAPCON
®
Selecting from a list To select a list entry, proceed as follows:
1. Use the rotary knob to navigate to the list and press the key.
Figure22: Select an entry from a list
2. Use the rotary knob to highlight the list entry and press the key.
3. Press the Accept button to save the modified parameter.
Entering a value To enter a value, proceed as follows:
1. Use the rotary knob to select the value field and press the key.
ð If operating via the front panel, the numerical keypad appears.
Figure23: Entering a value
2. Enter the desired value and confirm with .
3. Press the Accept button to save the modified parameter.