DIRECT INWARD DIALLING (DID)
– 225 –
A2222-10
DESCRIPTION DATA
Assign the Number Conversion Block
number.
•
(1)
(2)
Y=00
X-XXXX: DID No.
000-999: Number Conversion Block
No. 000-999
When the data for CM35 Y=18 is set to “0”
(Received Digits Conversion is to be pro-
vided), assign the data for interpreting the
digits received.
•
•
•
•
(1)
(2)
Y=01 Day Mode
Y=02 Night Mode
Y=03 Mode A
Y=04 Mode B
000-999: Number Conversion Block
No. assigned by CM76 Y=00
X-XXXXXXXX: Station No. to be termi-
nated
DXX: Change Terminating System to:
D02: Trunk Line Appearance
D03: Trunk Line Appearance +
TAS
D04: Direct-In Termination
D09: Automated Attendant
D10: Attendant Console + TAS
D11: Attendant Console + Trunk
Line Appearance
D12: Attendant Console + Trunk
Line Appearance + TAS
D14: Termination to Attendant
Console
D16: Remote Access to System
END
CM76
C
To Next Page
Loading...
