DIRECT INWARD DIALLING (DID)
– 224 –
A2222-10
DESCRIPTION DATA
Provide dedicated DTMF Receivers for
DID calls, if required.
•
(1)
(2)
Y=1
XX Z: DTMF Receiver No.
XX: 00: MP Built-in DTMF Receiver
01-15: 8RST card No. assigned by
CM10 (E200-E215)
Z : 0-3: Circuit No.
0 : Only for DID
1 : For both DTMF station and Tie
Line/DID
Assign the function of each Digital An-
nouncement Trunk, if needed.
•
(1)
(2)
Y=00
000-127: Digital Announcement Trunk
Card No.
0D00: Announcement Service when
the called station does not an-
swer the DID/Tie Line call
0800 : Announcement Service when
the DID/Tie Line call terminates
to the busy station
Assign the destination of DID call trans-
ferred when the station is busy/unas-
signed/no answer.
NOTE: When Announcement Service is
provided for No Answer (CM51
Y=00) or Busy (CM51 Y=03), see
ANNOUNCEMENT SERVICE.
page 21
When Announcement Service is
provided for unassigned (CM51
Y=06), see CALL FORWARD-
ING-INTERCEPT/
ANNOUNCEMENT.
page 92
•
•
•
(1)
(2)
Y=00 No Answer
Y=03 Busy
Y=06 Unassigned
00-63: Tenant No.
Destination:
X-XXXXXXXX: Station No.
E000: Attendant Console
EB000-EB127: Digital Announcement
Trunk Card No. as-
signed by CM10
NOTE
CM45
B
C
CM49
CM51
To Next Page
Loading...
