DISTINCTIVE RINGING
– 237 –
A2234-10
To provide the distinctive ringing patterns to D
term
s in behind PBX, in order to distinguish be-
tween an internal call from the main PBX and an external incoming call:
DESCRIPTION DATA
Specify the ringing pattern on an internal
call.
(1)
(2)
138: For Internal call
0 : As per CM08>392-Pattern 1
1 : As per CM08>396
Specify interval of ringer until detecting a
ringing frequency from the Main PBX
(Centrex). Ringing is sent from D
term
until
detection of the ringing frequency.
(1)
(2)
380
0 : As per CM08>381
1 : As per CM35 Y=33
(1)
(2)
381
0 : No Ringer
1 : Ringing Tone (0.5 sec.) is sent
once
Specify lamp indication of D
term
until de-
tecting the kind of incoming call from Main
PBX (Centrex).
The lamp is lit until detection of the ringing
frequency.
(1)
(2)
382
0 : Red Steady Light
1 : 120 IPM Flash
(As per CM35 Y=32)
Specify ringing distinction by detecting the
ringing signal from the Main PBX (Centr-
ex).
(1)
(2)
366
0 : Longer Ringing than CM41
Y=2>40: External call
Shorter Ringing than CM41
Y=2>40: Internal call
1 : Longer Ringing than CM41
Y=2>40: Internal call
Shorter Ringing than CM41
Y=2>40: External call
NOTE 1: When the ringer is for an internal
call, interval of ringing signal:
CM08>138
D
term
lamp color: Change to red
D
term
tone ringer: CM35 Y=34
NOTE 2: When the ringer is for an external
call, interval of ringing signal:
CM35 Y=33
D
term
lamp color: CM35 Y=32
D
term
tone ringer: CM35 Y=34
START
CM08
A
To Next Page
Loading...
