– 331 –
A2325-10
MESSAGE CENTER INTERFACE (MCI)
PROGRAMMING
MCI Programming
To add ANI (Automatic Number Identification) information to the MCI message format when the
ANI information is sent from network, do the following programming.
DESCRIPTION DATA
Provide sending of ANI information from
network to the VMS with MCI.
•
(1)
(2)
Y=138
00-63: Trunk Route No.
0: To send
Specify the message format sent to the
VMS with MCI as Expanded (with ANI)
format.
(1)
(2)
36
1: Expanded (with ANI)
CMD001
END
CM35
C
To Next Page
Loading...
