NIGHT CONNECTION-FIXED
NIGHT CONNECTION-FLEXIBLE
– 360 –
A2356-10
NOTE: A voice message can be sent to incoming C.O. lines during Night Mode.
• Different messages can be programmed on each C.O. line.
• The voice message can be programmed for Day/Night.
• More than one connection can be made to a Digital Announcement Trunk Card.
Only the first connection can be assured of hearing the message from the beginning.
• Announcements may be programmed to be repeated from 4 to 120 seconds in 4 sec-
ond increments.
DESCRIPTION DATA
Assign the function of the Digital An-
nouncement Trunk to Night Announce-
ment.
•
(1)
(2)
Y=00
000-001: Built-in DAT on MP card
002-127: Digital Announcement Trunk
Card (EB002-EB127) No. as-
signed by CM10
03000: Night Announcement Service
Specify the duration of an Announcement. •
(1)
(2)
Y=0
45
01-30: 4 sec.-120 sec.
(4 sec. increments)
If no data is set, the default setting is 60-64
sec.
To record, replay and delete a message,
assign the Digital Announcement Trunk
access code respectively.
•
(1)
(2)
Y=03
Numbering Plan Group 0-3
X-XXXX: Access Code
A100: Record
A101: Replay
A102: Delete
CM41
CM20
END
CM49
A
To Next Page
Loading...
