NIGHT CONNECTION-FIXED
NIGHT CONNECTION-FLEXIBLE
– 362 –
A2356-10
NOTE: A voice message can be sent to incoming DID lines during Night Mode.
• Different messages can be programmed on each DID line.
• The voice message can be programmed for Day/Night.
• More than one connection can be made to a Digital Announcement Trunk Card.
Only the first connection can be assured of hearing the message from the beginning.
• Announcements may be programmed to be repeated from 4 to 120 sec. in 4 sec. in-
crements.
DESCRIPTION DATA
Assign the function of the Digital An-
nouncement Trunk to Night Announce-
ment.
•
(1)
(2)
Y=00
000-001: Built-in DAT on MP card
002-127: Digital Announcement Trunk
Card (EB002-EB127) No. as-
signed by CM10
03000: For Night Announcement Ser-
vice
Assign the data for interpreting the digit re-
ceived.
•
•
•
•
(1)
(2)
Y=01 Day Mode
Y=02 Night Mode
Y=03 Mode A
Y=04 Mode B
X-XXXXXXXX: Station No. to be termi-
nated
D04: Direct-In Termination
Specify the duration of an Announcement. •
(1)
(2)
Y=0
45
01-30: 4 sec.-120 sec.
(4 sec. increments)
If no data is set, the default setting is 60-64
sec.
To record, replay and delete a message,
assign the Digital Announcement Trunk
access code respectively.
•
(1)
(2)
Y=0-3
Numbering Plan Group 0-3
X-XXXX: Access Code
A100: Record
A101: Replay
A102: Delete
CM49
CM76
END
A
CM41
CM20
To Next Page
Loading...
