NEC NEAX 2000 - Page 40

ANALOG PORT ADAPTER-D
term
– 20 –
A2018-10
HARDWARE REQUIRED
Analog Port Adapter
DESCRIPTION DATA
Assign an virtual key for analog terminal. •
(1)
(2)
Y=00
Analog Terminal Station No. + + Key
No.
X-XXXXXXXX: Analog Terminal Sta-
tion No. assigned by
CM10.
Assign an analog terminal station number
as Prime Line.
(1)
(2)
X-XXXXXXXX: Analog Terminal Sta-
tion No.
X-XXXXXXXX: Analog Terminal Sta-
tion No.
Provide the Analog Port Adapter to the re-
quired station.
•
(1)
(2)
Y=34
X-XXXXXXXX: Analog Terminal Sta-
tion No.
0: To connect
Specify whether a ringing signal is sent to
the analog terminal.
•
(1)
(2)
Y=35
X-XXXXXXXX: My Line No.
0 : Not sent
1 : To send
Specify the PAD control of the analog ter-
minal.
•
(1)
(2)
Y=09
X-XXXXXXXX: Analog Terminal Sta-
tion No.
0 : Without PAD
1 : With PAD 6dB
CM90
A
END
CM93
CM13
,