SPEED CALLING-SYSTEM
SPEED CALLING-SYSTEM-D
term
– 453 –
A2452-10
DESCRIPTION DATA
Allocate the memory area for Speed Call-
ing-System. A maximum of 300 memory
slots are available per system. The num-
ber of slots available for each Tenant is
also 300. Note that the memory blocks for
Hot Line Outside and Route Advance
(from Tie Line to C.O. Line) are included in
the 300 memory slots.
(1)
(2)
00-63: For stations in Tenant 00-63
64 : For Attendant console
XXX YYY
XXX: 000-299: First Memory Slot No. in
Block.
YYY: 001-300: Number of Slots to be
allocated in Block.
For example, to provide 20 memory
slots starting at Slot 60:
Data=060020
Abbreviated Codes for this feature are au-
tomatically determined by assigning this
command, on each Tenant as shown be-
low.
Example:
The number of digits for Abbreviated Codes is automatically determined as shown below:
• Less than 100 memory slots per Tenant: 2 digits (00-99)
•
In excess of 100 memory slots per Tenant: 3 digits (000-299)
NOTE: The Resident System Program allocates 100 memory slots to Tenant 01.
A
B
CM71
Slot 000
Slot 019
Tenant 00
20
memory
slots
00
19
Abbreviated
Codes
Slot 020
Slot 034
Tenant 01
15
memory
slots
00
14
Abbreviated
Codes
To Next Page
Loading...
