NEC NEAX 2000 - Page 474

SPEED CALLING-SYSTEM
SPEED CALLING-SYSTEM-D
term
– 454 –
A2452-10
DESCRIPTION DATA
Assign the number to be called to Memory
Slot number allocated by CM71.
•
(1)
(2)
Y=0
000-299: Memory Slot No.
Stored No.:
Outgoing Access code (Max. 4 digits) +
+ Called Party’s No. (Max. 26 digits)
To set a pause into the Stored No., enter “C”
(Fixed pause=1.5 sec.) or “D” (Programma-
ble pause specified by CM41 Y=0>38) after
desired digits.
Assign the station name for display, to the
Memory Slot number allocated by CM71,
by character codes or character.
•
(1)
(2)
Y=1
000-299: Memory Slot No.
XX...XX: Station Name Character
Code (Max. 32 digits, 16 char-
acters)
See APPENDIX B: CHARACTER
CODE TABLE.
•
(1)
(2)
Y=2
000-299: Memory Slot No.
XX...XX: Station Name Character
(Max. 16 characters)
Specify Speed Calling-System security.
(Stored number displays on D
term
for an
outgoing call by Speed Calling-System.)
(1)
(2)
043
0 : Not displayed
1 : To display
Specify whether to provide Toll Restriction
for an outgoing call by Speed Calling-Sys-
tem.
(1)
(2)
044
0 : Not provided
1 : To provide
Assign an access key for Speed Calling-
System to the D
term
s, as needed.
•
(1)
(2)
Y=00
My Line No. + + Key No.
F0067: Speed Calling-System origina-
tion (300-Slot Memory Block)
CM72
B
END
CM90
CM08
,
,