TIMED REMINDER
– 520 –
A2512-10
To provide internal announcement source by Digital Announcement Trunk (DAT card):
DESCRIPTION DATA
Assign a Digital Announcement Trunk card
number to the required LEN.
NOTE: The Digital Announcement Trunk
card number must be assigned
to the first LEN (Level 0), the
third LEN (Level 2), the fifth LEN
(Level 4) and the seventh LEN
(Level 6) of each LT slot.
(1) 000-763: LEN
EB002-EB127: Digital Announcement
Trunk Card No.
For PIM0/1: EB002-EB031
For PIM2/3: EB032-EB063
For PIM4/5: EB064-EB095
For PIM6/7: EB096-EB127
NOTE: EB000 and EB001 are dedi-
cated to built-in Digital An-
nouncement Trunk of the MP
card.
Assign the Service Restriction Class A for
Timed Reminder set and cancel.
•
(1)
(2)
Y=02
X-XXXXXXXX: My Line No.
XX ZZ
XX: 00-15 : Service Restriction Class
A
Allow Timed Reminder in the Service Re-
striction Class A assigned by CM12 Y=02.
•
(1)
(2)
Y=13
00-15: Service Restriction Class A as-
signed by CM12 Y=02
1 : Allow
Assign the access code for Timed Re-
minder set and cancel.
•
(1)
(2)
Y=0-3 Numbering Plan Group 0-3
X-XXXX: Access Code
A024: Set
A025: Cancel
Designate the type of tone source to be
connected when answering a Timed Re-
minder call.
•
(1)
(2)
Y=1
00: Tone source of Timed Reminder
0500: Digital Announcement Trunk
Assign the function of the Digital An-
nouncement Trunk card.
•
(1)
(2)
Y=00
000-001: Built-in DAT on MP card
002-127: Digital Announcement Trunk
No. assigned by CM10
(EB002-EB127)
0C XX: Answering Message on Timed
Reminder
XX: 00-63: Message No.
CM15
CM49
START
CM10
CM12
CM48
CM20
INITIAL
A
To Next Page
Loading...
