TRUNK TO TRUNK CONNECTION
– 541 –
A2536-10
DESCRIPTION DATA
Provide the system with Trunk to Trunk
Connection when no release signal arrives
from the incoming trunk route and answer
signal arrives from the outgoing trunk
route.
(1)
(2)
324
0 : Available
1 : Not available
Provide the system with Trunk to Trunk
Connection transferred by a station or an
attendant, when no answer signal arrives
and release signal arrives from the outgo-
ing trunk route.
(1)
(2)
028
0 : Available
1 : Not available
Specify the forced release timing for tan-
dem connection when the called party
does not answer.
This data is available when no release sig-
nal arrives from incoming trunk route.
•
(1)
(2)
Y=0
55
01-13: 12 sec.-60 sec.
(4 sec. increments)
If no data is set, the default setting is 20-24
sec.
CM41
END
CM08
A
To Next Page
Loading...
