NEC NEAX 2000 - Page 64

ATTENDANT TERMINAL-D
term
– 44 –
A2042-10
DESCRIPTION DATA
Assign the destination of Priority Call 0 to
each OPR line.
•
(1)
(2)
Y=12
00-63: Tenant No.
AB00-AB99: OPR Line No.
Assign the destination of Priority Call 0 to
the system.
(1)
(2)
250
0: Same station as CM51 Y=12
On the required trunks, assign the destina-
tion of DIT to each ICI line.
•
(1)
(2)
Y=02
000-255: Trunk No.
04: DIT
•
(1)
(2)
Y=04
000-255: Trunk No.
AB00-AB99: ICI Line No.
Provide the system with Day/Night Mode
Change by a NT key on Attendant Termi-
nal.
(1)
(2)
244: Terminating system change
0: Available
(1)
(2)
245: Trunk Restriction Class change
0: Available
Assign the Service Restriction Class B for
Day/Night Mode Change by station dialing
to Attendant Terminal.
•
(1)
(2)
Y=02
X-XXXXXXXX: My Line No.
XX ZZ
ZZ: 00-15 : Service Restriction Class
B
Allow Day/Night Mode Change by station
dialing in the Service Restriction Class B
assigned by CM12 Y=02.
•
(1)
(2)
Y=60
00-15: Service Restriction Class B as-
signed by CM12 Y=02
1 : Allow
Assign the Loop keys to each D
term
and
assign the function keys required for the
Attendant Terminal to the D
term
.
•
(1)
(2)
Y=00
My Line No. + + Key No.
AA01-AA75 : Loop Key
AB00-AB99 : ICI/OPR Key
F1020 : Release Key
F0300 : Operator Call Key
F1300-F1363: Night Key
Specify Line Preselection on a D
term
after
pressing the desired LINE/TRUNK key.
(1)
(2)
199
0 : Not required
1 : Required
CM08
CM30
CM08
CM51
CM12
CM15
CM90
END
CM08
,
B