NEC NEAX 2000 - Page 671

AUTOMATIC WAKE UP
– 651 –
A2636-10
DESCRIPTION DATA
When providing DAT, assign the answer-
ing message for Wake Up to the DAT card
or MP built-in DAT.
•
(1)
(2)
Y=00
000-001: Built-in DAT on MP card
002-127: Digital Announcement Trunk
Card No. assigned by CM10
0C XX: Answering message on Auto-
matic Wake Up
XX: 00-63: Message No.
•
(1)
(2)
Y=08
00-63: Tenant No.
00-63: Message No. assigned by
CM49 Y=00
Specify the duration of Wake Up call. •
(1)
(2)
Y=0
23
01-08: 4 sec.-32 sec.
(4 sec. increments)
If no data is set, the default setting is
28-32 sec.
When providing the DAT, specify the dura-
tion of message replay timer for Automatic
Wake Up.
•
(1)
(2)
Y=0
52
01-99: 4 sec.-396 sec.
(4 sec. increments)
If no data is set, the default setting is
60-64 sec.
Specify the number of Wake Up call at-
tempts before abandonment.
(1)
(2)
03
01-05: Number of attempted Wake Up
calls
If no data is set, the default setting is
05.
Specify the maximum number of Wake Up
calls can be set at the same time.
(1)
(2)
04
01-32: Max. number of stations
If no data is set, the default setting is
16.
CM41
CM42
CM49
D
E