NEC NEAX 2000 - Page 670

AUTOMATIC WAKE UP
– 650 –
A2636-10
DESCRIPTION DATA
Specify the condition for printing the Wake
Up call information if Hotel Printer is pro-
vided.
(1)
(2)
282: “RING ON OK” when call starts
283: “STATION BUSY” when station is
busy
284: “CONNECTION BLOCK” when
call is unsuccessful
286: “STATION ANSWER” when sta-
tion answers
287: “STATION NO ANSWER” when
station does not answer
0 : Not printed
1 : To print
Specify whether Automatic Wake Up
record is printed out on Hotel Printer, and
the report is sent to PMS when setting or
resetting Automatic Wake Up.
(1)
(2)
267
0 : Available
1 : Not available
Assign the function keys for Automatic
Wake Up to the D
term
of guest room sta-
tion or administrative station, if provided.
NOTE: This data assignment is not re-
quired when Wake Up is set by
PMS.
•
(1)
(2)
Y=00
My Line No. + + Key No.
F0024: Automatic Wake Up set/reset
from guest station
F0027: Automatic Wake Up set/reset
from administrative station with
Single Wake Up Time opera-
tion.
NOTE
F0028: Automatic Wake Up set/reset
from administrative station with
Multiple Wake Up Time opera-
tion. NOTE
Assign the function keys for Automatic
Wake Up to the Front Desk Terminal.
NOTE: This data assignment is not re-
quired when Wake Up is set by
PMS.
•
(1)
(2)
Y=00
My Line No. + + Key No.
F1067: Automatic Wake Up
NOTE
F1074: Set
F1075: Reset
F1077: Release
CM90
CM08
C
D
,
,