AUTOMATIC WAKE UP
– 649 –
A2636-10
DESCRIPTION DATA
When the DAT is required, assign the DAT
to the required LEN.
NOTE: The DAT card number must be
assigned to the first LEN (Level
0), the third LEN (Level 2), the
fifth LEN (Level 4) and the sev-
enth LEN (Level 6) of each LT
slot.
(1)
(2)
000-763: LEN
EB002-EB127:
Digital Announcement Trunk Card No.
For PIM0/1: EB002-EB031
For PIM2/3: EB032-EB063
For PIM4/5: EB064-EB095
For PIM6/7: EB096-EB127
NOTE: EB000 and EB001 are dedi-
cated to built-in DAT of MP
card.
When an External Announcement Ma-
chine is required, assign the function for
Wake Up to the DK card or MP built-in DK.
(1)
(2)
XX Y
XX : 00-31: DK Card No. E800-E831
assigned by CM10
Y : 0-3: Circuit No.
313: MP built-in External Equipment In-
terface
0100: External Announcement Ma-
chine for Wake-Up Call
Specify the sending Wake Up message to
Hotel Printer and PMS, when setting Wake
Up feature from guest station.
(1)
(2)
200
0: Available
Specify the timing for Wake Up call start. (1)
(2)
228: Wake Up Call Start Timing
0 : At preset time
1 : 5 minutes prior to preset time
CM44
CM08
CM10
B
C
To Next Page
Loading...
