User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
8-80 Switching Commands
202-10009-01_060204
Designated Root Identifier of the Regional Root for this multiple spanning tree
instance.
Root Path Cost Path Cost to the Designated Root for this multiple spanning tree
instance
Root Port Identifier Port to access the Designated Root for this multiple spanning tree
instance
Associated FIDs List of forwarding database identifiers associated with this
instance.
Associated VLANs List of VLAN IDs associated with this instance.
show spanning-tree mst port detailed
This command displays the detailed settings and parameters for a specific switch port within a
particular multiple spanning tree instance. The instance <mstid> is a number that corresponds to
the desired existing multiple spanning tree instance. The <slot/port> is the desired switch port.
Format show spanning-tree mst port detailed <mstid> <slot/port>
Mode Privileged EXEC and User EXEC
MST Instance ID
Port Identifier
Port Priority
Port Forwarding State Current spanning tree state of this port
Port Role
Port Path Cost Configured value of the Internal Port Path Cost parameter
Designated Root The Identifier of the designated root for this port.
Designated Port Cost Path Cost offered to the LAN by the Designated Port
Designated Bridge
Bridge Identifier of the bridge with the Designated Port.
Designated Port Identifier Port on the Designated Bridge that offers the lowest cost to
the
LAN
If 0 (defined as the default CIST ID) is passed as the <mstid>, then this command displays the
settings and parameters for a specific switch port within the common and internal spanning tree.
The <slot/port> is the desired switch port. In this case, the followig are displayed.
To Next Page
Loading...
Need help?
General
