NETGEAR 7300 Series User Manual

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
Switching Commands 8-37
202-10009-01_060204
Default enabled
Format ip http server
Mode Privileged EXEC
no ip http server
This command disables access to the switch through the Web interface. When access is disabled,
the user cannot login to the switch's Web server.
Default enabled
Format
no ip http server
Mode Privileged EXEC
show ip http
This command displays the http settings for the switch.
Format
show ip http
Mode Privileged EXEC
Secure-Server Administrative Mode This field indicates whether the administrative
mode of secure HTTP is enabled or disabled.
Secure Protocol Level The protocol level may have the values of SSL3, TSL1, or both
SSL3 and TSL1.
Secure Port This field specifies the port configured for SSLT.
HTTP Mode THis field indicates whether the HTTP mode is enabled or dis-
abled.
Secure Shell (SSH) Commands
ip ssh
This command is used to enable SSH.
Default Disabled
Format
ip ssh
Mode Privileged EXEC

NETGEAR 7300 Series Specifications

General

Model	NETGEAR 7300 Series
Form Factor	Rack-mountable
VLAN Support	Yes
Jumbo Frame Support	9KB
Management	Web-based, CLI
Layer	Layer 2/3