User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
8-2 Switching Commands
202-10009-01_060204
numbers that are separated by colons, for example
01:23:45:67:89:AB
IP Address The IP address assigned to each interface.
slot/port Valid slot number and a valid port number.
show eventlog
This command displays the event log, which contains error messages from the system. The event
log is not cleared on a system reset.
Format
show eventlog
Mode Privileged EXEC
File The file in which the event originated.
Line The line number of the event
Task Id The task ID of the event.
Code The event code.
Time The time this event occurred.
Note: Event log information is retained across a switch reset.
show hardware
This command displays inventory information for the switch.
Format
show hardware
Mode
Privileged EXEC
Switch Description Text used to identify the product name of this switch.
Machine Type Specifies the machine model as defined by the Vital Product
Data.
Machine Model Specifies the machine model as defined by the Vital Product
Data.
Serial Number The unique box serial number for this switch.
FRU Number The field replaceable unit number.
Part Number Manufacturing part number.
Maintenance Level Indicates hardware changes that are significant to software.
Manufacturer Manufacturer descriptor field.
To Next Page
Loading...
Need help?
General
