NETGEAR 7300 Series

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
9-60 Routing Commands
202-10009-01_060204
no ip vrrp priority
This command sets the default priority value for the virtual router configured on a specified
interface.
Format
no ip vrrp <vrID> priority
Mode Interface Config
ip vrrp timers advertise
This command sets the advertisement value for a virtual router. The value for advinterval is time
used for VRRP advertisement in seconds. The parameter <vrID> is the virtual router ID which has
an integer value range from 1 to 255.
Default 1
Format
ip vrrp <vrID> timers advertise <1-255>
Mode Interface Config
no ip vrrp timers advertise
This command sets the default advertisement value for a virtual router.
Format
no ip vrrp <vrID> timers advertise
Mode Interface Config