User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
Switching Commands 8-59
202-10009-01_060204
Component The component that is responsible for this entry in the Multicast
Forwarding Database. Possible values are IGMP Snooping,
GMRP, and Static Filtering.
Description The text description of this multicast table entry.
Interfaces The list of interfaces that are designated for forwarding (Fwd:)
and filtering (Flt:).
Forwarding Interfaces The resultant forwarding list is derived from combining all the
component’s forwarding interfaces and removing the interfaces
that are listed as the static filtering interfaces.
show mac-address-table static
This command displays the Static MAC Filtering information for all Static MAC Filters. If <all> is
selected, all the Static MAC Filters in the system are displayed. If a macaddr is entered, a vlan
must also be entered and the Static MAC Filter information will be displayed only for that MAC
address and VLAN.
Format
show mac-address-table static {<macaddr> <vlanid> |
all}
Mode Privileged EXEC
MAC Address Is the MAC Address of the static MAC filter entry.
VLAN ID Is the VLAN ID of the static MAC filter entry.
Source Port(s) Indicates the source port filter set's slot and port(s).
Destination Port(s) Indicates the destination port filter set's slot and port(s).
show mac-address-table staticfiltering
This command displays the Static Filtering entries in the Multicast Forwarding Database (MFDB)
table.
Format
show mac-address-table staticfiltering
Mode Privileged EXEC
Mac Address
A unicast MAC address for which the switch has forwarding and
or filtering information. The format is 6 or 8 two-digit hexadeci-
mal numbers that are separated by colons, for example
01:23:45:67:89:AB. In an IVL system the MAC address will be
To Next Page
Loading...
Need help?
General
