NETGEAR 7300 Series User Manual

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
Routing Commands 9-11
202-10009-01_060204
Default 4
Format
arp retries <0-10>
Mode Global Config
no arp retries
This command configures the default ARP count of maximum request for retries.
Format
no arp retries
Mode Global Config
arp timeout
This command configures the ARP entry ageout time.
The value for <seconds> is a valid positive integer, which represents the IP ARP entry ageout time
in seconds. The range for <seconds> is between 15-21600 seconds.
Default 1200
Format
arp timeout <15-21600>
Mode Global Config
no arp timeout
This command configures the default ARP entry ageout time.
Format
no arp timeout
Mode Global Config
auto-summary
This command enables the RIP auto-summarization mode.
Default Enabled
Format
auto-summary
Mode Router RIP Config

NETGEAR 7300 Series Specifications

General

Model	NETGEAR 7300 Series
Form Factor	Rack-mountable
VLAN Support	Yes
Jumbo Frame Support	9KB
Management	Web-based, CLI
Layer	Layer 2/3