NETGEAR 7300 Series User Manual

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
DHCP Server Commands 12-5
202-10009-01_060204
ip dhcp pool
This command configures a DHCP address pool name on a DHCP server and enters DHCP pool
configuration mode.
Default None
Format ip dhcp pool <name>
Mode Global Config Mode
no ip dhcp pool
This command removes the DHCP address pool. The name should be previously configured pool
name.
Format no ip dhcp pool <name>
Mode Global Config Mode
lease
This command configures the duration of the lease for an IP address that is assigned from a DHCP
server to a DHCP client. The overall lease time should be between 1-86400 minutes. If infinite is
specified, lease is set for 60 days. Days is an integer from 0 to 59. Hours is an integer from 0 to
1339. Minutes is an integer from 0 to 86399.
Default 1 (day)
Format lease [<days> [hours] [minutes]] | [infinite]
Mode DHCP Pool Config
no lease
This command restores the default value of the lease time for DHCP Server.
Format no lease
Mode DHCP Pool Config

NETGEAR 7300 Series Specifications

General

Model	NETGEAR 7300 Series
Form Factor	Rack-mountable
VLAN Support	Yes
Jumbo Frame Support	9KB
Management	Web-based, CLI
Layer	Layer 2/3