NETGEAR 7300 Series User Manual

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
DHCP Server Commands 12-9
202-10009-01_060204
DHCPOFFER The number of DHCPOFFER messages that were sent by the
server.
DHCPACK The number of DHCPPACK messages that were sent by the
server.
DHCPNACK The number of DHCPNACK messages that were sent by the
server.
DHCP Server Clear Commands
These commands clears the DHCP Server address bindings, and statistics.
clear ip dhcp binding
This command deletes an automatic address binding from the DHCP server database. If “*” is
specified, the bindings corresponding to all the addresses are deleted. <address> is a valid IP
address made up of four decimal bytes ranging from 0 to 255. IP address 0.0.0.0 is invalid.
Default None
Format clear ip dhcp binding <address|*>
Mode Privileged EXEC
clear ip dhcp server statistics
This command clear DHCP server statistics counters.
Format clear ip dhcp server statistics
Mode Privileged EXEC

NETGEAR 7300 Series Specifications

General

Model	NETGEAR 7300 Series
Form Factor	Rack-mountable
VLAN Support	Yes
Jumbo Frame Support	9KB
Management	Web-based, CLI
Layer	Layer 2/3