NETGEAR 7300 Series User Manual

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
Switching Commands 8-39
202-10009-01_060204
Format addport <logical slot/port>
Mode Interface Config
auto-negotiate
This command enables automatic negotiation on a port. The default value is enable.
Format
auto-negotiate
Mode Interface Config
no auto-negotiate
This command disables automatic negotiation on a port.
Format
no auto-negotiate
Mode Interface Config
auto-negotiate all
This command enables automatic negotiation on all ports. The default value is enable.
Format
auto-negotiate all
Mode Global Config
no auto-negotiate all
This command disables automatic negotiation on all ports.
Format
no auto-negotiate all
Mode Global Config
delete interface
This command deletes an existing port-channel (LAG) from the configuration. The interface is a
logical slot and port for a configured port-channel. The
all option removes all configured port-
channels (LAGs).
Format
delete interface {<logical slot/port> | all}
Mode Interface Config

NETGEAR 7300 Series Specifications

General

Model	NETGEAR 7300 Series
Form Factor	Rack-mountable
VLAN Support	Yes
Jumbo Frame Support	9KB
Management	Web-based, CLI
Layer	Layer 2/3