NETGEAR 7300 Series User Manual

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
9-12 Routing Commands
202-10009-01_060204
no auto-summary
This command disables the RIP auto-summarization mode.
Format
no auto-summary
Mode Router RIP Config
bootpdhcprelay cidoptmode
This command enables the circuit ID option mode for BootP/DHCP Relay on the system.
Default Disabled
Format
bootpdhcprelay cidoptmode
Mode Global Config
no bootpdhcprelay cidoptmode
This command disables the circuit ID option mode for BootP/DHCP Relay on the system.
Format
no bootpdhcprelay cidoptmode
Mode Global Config
bootpdhcprelay disable
This command disables the forwarding of relay requests for BootP/DHCP Relay on the system.
Default Disabled
Format
bootpdhcprelay disable
Mode Global Config
no bootpdhcprelay disable
This command enables the forwarding of relay requests for BootP/DHCP Relay on the system.
Format
no bootpdhcprelay disable
Mode Global Config

NETGEAR 7300 Series Specifications

General

Model	NETGEAR 7300 Series
Form Factor	Rack-mountable
VLAN Support	Yes
Jumbo Frame Support	9KB
Management	Web-based, CLI
Layer	Layer 2/3