NETGEAR 7300 Series User Manual

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
9-22 Routing Commands
202-10009-01_060204
no ip irdp
This command disables Router Discovery on an interface.
Format
no ip irdp
Mode Interface Config
ip irdp address
This command configures the address to be used to advertise the router for the interface. The valid
values for ipaddr are 224.0.0.1 and 255.255.255.255.
Default 224.0.0.1
Format
ip irdp address <ipaddr>
Mode Interface Config
no ip irdp address
This command configures the default address to be used to advertise the router for the interface.
Format
no ip irdp address
Mode Interface Config
ip irdp holdtime
This command configures the value, in seconds, of the holdtime field of the router advertisement
sent from this interface. The range is the maxadvertinterval to 9000 seconds.
Default 3 * maxinterval
Format
ip irdp holdtime <maxadvertinterval-9000>
Mode Interface Config
no ip irdp holdtime
This command configures the default value, in seconds, of the holdtime field of the router
advertisement sent from this interface.
Format
no ip irdp holdtime
Mode Interface Config

NETGEAR 7300 Series Specifications

General

Model	NETGEAR 7300 Series
Form Factor	Rack-mountable
VLAN Support	Yes
Jumbo Frame Support	9KB
Management	Web-based, CLI
Layer	Layer 2/3