EasyManuals Logo

NETGEAR 7300 Series User Manual

NETGEAR 7300 Series
364 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #173 background imageLoading...
Page #173 background image
User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
Switching Commands 8-107
202-10009-01_060204
If none of the optional parameters are used, the global dot1x configuration summary is displayed.
Administrative mode Indicates whether authentication control on the switch is enabled
or disabled.
If the optional parameter 'summary {<slot/port> | all}' is used, the
dot1x configuration for the specified port or all ports are dis-
played.
Port The interface whose configuration is displayed.
Control Mode The configured control mode for this port. Possible values are
force-unauthorized / force-authorized / auto
Operating Control Mode The control mode under which this port is operating. Possible
values are authorized / unauthorized
Reauthentication Enabled Indicates whether re-authentication is enabled on this port
Key Transmission Enabled Indicates if the key is transmitted to the supplicant for the
specified port
If the optional parameter 'detail <slot/port>' is used, the detailed dot1x configuration for the
specified port are displayed.
Port The interface whose configuration is displayed
Protocol Version The protocol version associated with this port. The only possible
value is 1, corresponding to the first version of the dot1x specifi-
cation.
PAE Capabilities The port access entity (PAE) functionality of this port. Possible
values are Authenticator or Supplicant.
Authenticator PAE State Current state of the authenticator PAE state machine. Possible
values are Initialize, Disconnected, Connecting, Authenticating,
Authenticated, Aborting, Held, ForceAuthorized, and ForceUn-
authorized.
Backend Authentication State Current state of the backend authentication state machine.
Possible values are Request, Response, Success, Fail, Timeout,
Idle, and Initialize.
Quiet Period The timer used by the authenticator state machine on this port to
define periods of time in which it will not attempt to acquire a
supplicant. The value is expressed in seconds and will be in the
range 0 and 65535.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR 7300 Series and is the answer not in the manual?

NETGEAR 7300 Series Specifications

General IconGeneral
ModelNETGEAR 7300 Series
Form FactorRack-mountable
VLAN SupportYes
Jumbo Frame Support9KB
ManagementWeb-based, CLI
LayerLayer 2/3

Related product manuals