NETGEAR 7300 Series - Page 295

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
IS CLI Mapping A-7
202-10009-01_060204
QOS show diffserv service stats
summary [in/out]
Privileged
EXEC
show service-policy [in | out]
QOS config diffserv service add <in/out>
<slot/port/all> <policyname>
Interface
Config
service-policy {in | out}
<policymapname>
QOS config diffserv service remove <in/
out> <slot/port/all> <policyname>
Interface
Config
no service-policy {in | out}
<policymapname>
QOS config diffserv service add <in/out>
<slot/port/all> <policyname>
Global
Config
service-policy {in | out}
<policymapname>
QOS config diffserv service remove <in/
out> <slot/port/all> <policyname>
Global
Config
no service-policy {in | out}
<policymapname>
QOS show diffserv class detailed
<classname>
Privileged
EXEC and
User
EXEC
show class-map [<classname>]
QOS show diffserv class summary Privileged
EXEC and
User
EXEC
QOS config diffserv class create any
<classname>
Global
Config
class-map {{match-all}
<classmapname>} |
{match-access-group
<classmapname> <aclid>}
QOS config diffserv class create all
<classname>
Global
Config
class-map {{match-all}
<classmapname>} |
{match-access-group
<classmapname> <aclid>}
QOS config diffserv class delete
<classname>
Global
Config
no class-map <classmapname>
QOS config diffserv class rename
<classname> <newclassname>
Global
Config
class-map rename <classmapname>
<newclassmapname>
QOS config diffserv class match cos
<classname> <0-7> [exclude]
Class-Ma
p Config
match cos <0-7>
Table 13-2. IS CLI Mapping (continued)
Package 7300 Series L3 Switch Command
CLI Command
Mode Syntax