NETGEAR 7300 Series - Page 296

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
A-8 IS CLI Mapping
202-10009-01_060204
Class-Ma
p Config
match not cos <0-7>
QOS config diffserv class match dstip
<classname> <ipaddr> <ipmask>
[exclude]
Class-Ma
p Config
match dstip <ipaddr> <ipmask>
Class-Ma
p Config
match not dstip <ipaddr> <ipmask>
QOS config diffserv class match
dstl4port keyword <classname>
<port-key> [exclude]
Class-Ma
p Config
match dstl4port {<portkey> |
<0-65535> [<0-65535>]}
QOS config diffserv class match
dstl4port number <classname>
<0-65535> [exclude]
Class-Ma
p Config
match not dstl4port {<portkey> |
<0-65535> [<0-65535>]}
QOS config diffserv class match
dstl4port range <classname>
<0-65535> <0-65535> [exclude]
QOS config diffserv class match dstmac
<classname> <macaddr>
<mac-mask> [exclude]
Class-Ma
p Config
match destination-address mac
<address> <macmask>
Class-Ma
p Config
match not destination-address mac
<address> <macmask>
QOS config diffserv class match ipdscp
<classname> <dscpval> [exclude]
Class-Ma
p Config
match ip dscp <value>
Class-Ma
p Config
match not ip dscp <value>
QOS config diffserv class match
ipprecedence <classname> <0-7>
[exclude]
Class-Ma
p Config
match ip precedence <0-7>
Class-Ma
p Config
match not ip precedence <0-7>
Table 13-2. IS CLI Mapping (continued)
Package 7300 Series L3 Switch Command
CLI Command
Mode Syntax