NETGEAR 7300 Series - Page 297

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
IS CLI Mapping A-9
202-10009-01_060204
QOS config diffserv class match iptos
<classname> <tosbits> <tosmask>
[exclude]
Class-Ma
p Config
match ip tos <tosbits> <tosmask>
Class-Ma
p Config
match not ip tos <tosbits> <tosmask>
QOS config diffserv class match protocol
keyword <classname>
<protocolkey> [exclude]
Class-Ma
p Config
match protocol {<protocol-name> |
<0-255>}
QOS config diffserv class match protocol
number <classname> <0-255>
[exclude]
Class-Ma
p Config
match not protocol {<protocol-name>
| <0-255>}
QOS config diffserv class match refclass
<add/remove> <classname>
<refclassname>
Class-Ma
p Config
match class-map <refclassname>
Class-Ma
p Config
no match class-map <refclassname>
QOS config diffserv class match srcip
<classname> <ipaddr> <ipmask>
[exclude]
Class-Ma
p Config
match srcip <ipaddr> <ipmask>
Class-Ma
p Config
match not srcip <ipaddr> <ipmask>
QOS config diffserv class match
srcl4port keyword <classname>
<portkey> [exclude]
Class-Ma
p Config
match srcl4port {<portkey> |
<0-65535> [<0-65535>]}
QOS config diffserv class match
srcl4port number <classname>
<0-65535> [exclude]
Class-Ma
p Config
match not srcl4port {<portkey> |
<0-65535> [<0-65535>]}
QOS config diffserv class match
srcl4port range <classname>
<0-65535> <0-65535> [exclude]
QOS config diffserv class match srcmac
<classname> <macaddr>
<macmask> [exclude]
Class-Ma
p Config
match source-address mac
<address> <macmask>
Table 13-2. IS CLI Mapping (continued)
Package 7300 Series L3 Switch Command
CLI Command
Mode Syntax