NETGEAR 7300 Series - Page 313

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
IS CLI Mapping A-25
202-10009-01_060204
Global
Config
no snmp-server community ipmask
<name>
Switching config snmpcommunity mode
<enable | disable> <name>
Global
Config
snmp-server community mode
<name>
Global
Config
no snmp-server community mode
<name>
Switching config snmptrap create <name>
<ipaddr>
Global
Config
snmptrap <name> <ipaddr>
Switching config snmptrap delete <name>
<ipaddr>
Global
Config
no snmptrap <name> <ipaddr>
Switching config snmptrap ipaddr
<ipaddrold> <name> <ipaddrnew>
Global
Config
snmptrap ipaddr <name> <ipaddrold>
<ipaddrnew>
Switching config snmptrap mode <enable |
disable> <name> <ipaddr>
Global
Config
snmptrap mode <name> <ipaddr>
Global
Config
no snmptrap mode <name> <ipaddr>
Switching config trapflags authentication
<enable | disable>
Global
Config
snmp-server enable traps
Global
Config
no snmp-server enable traps
Switching config trapflags bcaststorm
<enable | disable>
Global
Config
snmp-server enable traps bcaststorm
Global
Config
no snmp-server enable traps
bcaststorm
Switching config trapflags linkmode <enable |
disable>
Global
Config
snmp-server enable traps linkmode
Global
Config
no snmp-server enable traps
linkmode
Switching config trapflags multiusers <enable
| disable>
Global
Config
snmp-server enable traps multiusers
Table 13-2. IS CLI Mapping (continued)
Package 7300 Series L3 Switch Command
CLI Command
Mode Syntax