NETGEAR 7300 Series - Page 318

User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
A-30 IS CLI Mapping
202-10009-01_060204
Switching config spanningtree mst port
pathcost <mstid> <slot/port>
<1-200000000/auto>
Interface
Config
spanning-tree mst <mstid> cost
{<1-200000000> | auto}
Interface
Config
no spanning-tree mst <mstid> cost
Switching config spanningtree mst port
priority <mstid> <slot/port>
<0-240>
Interface
Config
spanning-tree mst <mstid>
port-priority <0-240>
Interface
Config
no spanning-tree mst <mstid>
port-priority
Switching show inventory Privileged
EXEC
show hardware
Switching show sysinfo Privileged
EXEC
show sysinfo
Switching show arp switch Privileged
EXEC
show arp switch
Switching show forwardingdb table [macaddr/
all]
Privileged
EXEC
show mac-addr-table [{<macaddr> |
all}]
Switching show stats port detailed <slot/port> Privileged
EXEC
show interface ethernet {<slot/port> |
switchport}
Switching show stats switch detailed Privileged
EXEC
Switching show stats port summary <slot/
port>
Privileged
EXEC
show interface {<slot/port> |
switchport}
Switching show stats switch summary Privileged
EXEC
Switching show eventlog Privileged
EXEC
show eventlog
Switching show msglog Privileged
EXEC
show msglog
Table 13-2. IS CLI Mapping (continued)
Package 7300 Series L3 Switch Command
CLI Command
Mode Syntax